Zhongshan WeiDing Machinery Manufacturing Co., Ltd.
banner
Home » Product > Transformer Winding Machine > Transformer Winder
Product Categories
4 Coil Winding Machine With Pedal

4 Coil Winding Machine With Pedal

WDTC-04big transformer winding machine Flat wire winding machine Large torsion winding machine Air Coil Winding Machine for Self bonding wire Cnc single spindle winding machine Computer controlled general transformer and bobbin winder with single winding heads. Recommended for wire gauge 38-9...

Send Inquiry

WDTC-04 coil  winding machine with pedal

 

Computer controlled general transformer and bobbin winder with single winding heads. Recommended for wire gauge 38-9

 

 

NO.

Description

Unit

details

1

Model No


WDTC-04

2

For Up To 150KVA Transformer


230/400 Volt,3phase,50HZ

6

Coil   details

7

Coil dia(min.)

mm

0-280

8

Max.coil length

mm

0-210

9

Size of wound conductor

SWG

10-25

10

Machine   details

11

Center height over table/bench

mm

140MM

13

Shaft diameter

mm

30

15

Winding speed

rpm

0-1200

16

More taper tail stock


HAVE

17

Dimension of equipment(LXWXH)


0.9MX0.5MX0.6M

18

Accessories


Spanner,felt and others

Features


Model

WDTC-04

Spindle No.

1

Winding speed

0-1200rpm (customizable to 6000rpm)

Winding wire diameter

0.1-2.8mm(AWG38-9)

Winding coil diameter

0-280mm(11inch)

Traverse distance

0-210mm(8.2inch)

Power

220v/50-60Hz (customizable)

Dimension

900*500*665MM

Weight

120KG


Options/Accessories:
• Keyless Chuck Adapter – Tooling (1 required)

 

Winding machine advantages

1. The use of independent bearing design, toothed belt replacement quick and easy.

2. Power-off save winding data, effectively avoid scrap coil.

3. wind to bobbin end side, intelligent deceleration, can fast winding thick wire.

4. Machine can automatic measure out the start winding data and winding width.

5. Can set the spindle climb time, you can set the winding speed up and down when the machine winding.

6. Full-English touch screen display, the operation more convenient and quick.

7. Using 32-bit ARM control chip controller, faster computing speed, effectively reducing the cable error.

8. All optical input and output isolation, work stability.

9. The use of Japan imported bearings, belts, Taiwan imported inverter and screw to ensure stable performance.

 

•ENTIRE WINDING PROGRAM ENTERED INTO COMPUTER IN A SIMPLE MANNER 

•PROGRAMS INCLUDE TURNS, WIRE PITCH AND WINDING SPEED WITH SLOW START AND FINISH 

•4 QUICKLY CHANGED SPEED TORQUE RANGES UP TO 6,000 RPM FOR WIDE RANGE OF WIRE SIZES

AND TORQUE REQUIREMENTS 

•DIFFERENT COIL INSTRUCTIONS CAN BE STORED IN COMPUTER MEMORY AND QUICKLY CALLED

UP BY OPERATOR

•ELECTRONIC CONTROLLED TRAVERSE WITH STEPPING MOTOR DRIVE

•MOST FEATURES INCLUDED AS STANDARD EQUIPMENT AT REMARKABLY LOW COST

•FOOT SWITCH STANDARD 

•SIMPLIFIED OPERATOR INSTRUCTION

•ELECTRIC BRAKE STANDARD

•MANUAL FOR STEP-BY-STEP PROCEDURES

•QUIET RUNNING

 

Scope of application:

Suitable for high-frequency transformers winding, low-frequency transformers winding, inductors winding and other coils winding.

 

Instructions for use:

1.Please use 220V ± 10% / 50HZ power supply.

2.Do not place the device in a strong electromagnetic interference environment.

3.Equipment should be -10 ℃ -40 ℃ 95% RH non-condensing environment use.

4.Main circuit board is susceptible to electrostatic damage and damage, do not touch the main circuit board.

5.Do not start and shut down the power frequently, turn off the power after 10 seconds before starting.

WDTC-04

微信图片_20180921150314.jpg





image005.jpg
image007(001).jpg






Hot Tags: 4 Coil Winding Machine With Pedal, manufacturers, suppliers, factory, customized, in stock

Inquiry