Zhongshan WeiDing Machinery Manufacturing Co., Ltd.
banner
Home » Product > Coil Winding > Bentch Top Coil Winding
Product Categories
DESK TOP Semi Automatic PT TRANSFORMER Coil Winding Machine

DESK TOP Semi Automatic PT TRANSFORMER Coil Winding Machine

WDTC-01DESK TOP Semi Automatic PT TRANSFORMER Coil Winding Machine Computer controlled general transformer and bobbin winder with single winding heads. Recommended for wire gauge 38-9 Features Options/Accessories: • System Enhancement with Foot Pedal Speed Control • Keyless Chuck Adapter – Tooling (1 required) Winding machine...

Send Inquiry

WDTC-01DESK TOP Semi Automatic PT TRANSFORMER Coil Winding Machine 

ballast winding machine

image

image

 

Computer controlled general transformer and bobbin winder with single winding heads. Recommended for wire gauge 38-9


Features


Model

WDTC-01

Spindle No.

1

Winding speed

0-1200rpm (customizable to 6000rpm)

Winding wire diameter

0.1-2.8mm(AWG38-9)

Winding coil diameter

0-280mm(11inch)

Traverse distance

0-210mm(8.2inch)

Power

220v/50-60Hz (customizable)

Dimension

900*500*665MM

Weight

120KG


Options/Accessories:
• System Enhancement with Foot Pedal Speed Control
• Keyless Chuck Adapter – Tooling (1 required)

 

Winding machine advantages

1. The use of independent bearing design, toothed belt replacement quick and easy.

2. Power-off save winding data, effectively avoid scrap coil.

3. wind to bobbin end side, intelligent deceleration, can fast winding thick wire.

4. Machine can automatic measure out the start winding data and winding width.

5. Can set the spindle climb time, you can set the winding speed up and down when the machine winding.

6. Full-English touch screen display, the operation more convenient and quick.

7. Using 32-bit ARM control chip controller, faster computing speed, effectively reducing the cable error.

8. All optical input and output isolation, work stability.

9. The use of Japan imported bearings, belts, Taiwan imported inverter and screw to ensure stable performance.

 

•ENTIRE WINDING PROGRAM ENTERED INTO COMPUTER IN A SIMPLE MANNER 

•PROGRAMS INCLUDE TURNS, WIRE PITCH AND WINDING SPEED WITH SLOW START AND FINISH

•4 QUICKLY CHANGED SPEED TORQUE RANGES UP TO 6,000 RPM FOR WIDE RANGE OF WIRE SIZES

AND TORQUE REQUIREMENTS 

•DIFFERENT COIL INSTRUCTIONS CAN BE STORED IN COMPUTER MEMORY AND QUICKLY CALLED

UP BY OPERATOR 

•ELECTRONIC CONTROLLED TRAVERSE WITH STEPPING MOTOR DRIVE 

•MOST FEATURES INCLUDED AS STANDARD EQUIPMENT AT REMARKABLY LOW COST

•FOOT SWITCH STANDARD 

•SIMPLIFIED OPERATOR INSTRUCTION

•ELECTRIC BRAKE STANDARD

•MANUAL FOR STEP-BY-STEP PROCEDURES

•QUIET RUNNING

   

Scope of application:

Suitable for ballast winding,high-frequency transformers winding, low-frequency transformers winding, inductors winding and other coils winding.

 

Instructions for use:

1.Please use 220V ± 10% / 50HZ power supply.

2.Do not place the device in a strong electromagnetic interference environment.

3.Equipment should be -10 ℃ -40 ℃ 95% RH non-condensing environment use.

4.Main circuit board is susceptible to electrostatic damage and damage, do not touch the main circuit board.

5.Do not start and shut down the power frequently, turn off the power after 10 seconds before starting.


image005.jpg image007.jpg

image009(001).jpg



Hot Tags: desk top semi automatic pt transformer coil winding machine, manufacturers, suppliers, factory, customized, in stock

Inquiry